Ranger RL-8500 Combination Disc/Drum Brake Lathe w/Bench & Std Tooling 5150066
Only .. left! .. people are viewing this, and .. recently purchased it
.. Visitor Right Now
Simple, Durable, Trouble-Free Combination Brake Lathe
The revolutionary RL-8500 combination brake lathe uses independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically-driven lathes.
The ruggedly built RL-8500 brake lathe is capable of faster, easier and more accurate rotor/flywheel and drum/flywheel resurfacing than any other brake lathe in its class. Infinitely adjustable feed rates allow you to easily modify cut speeds with the simple turn of a dial. Now you can reduce or increase the cut-time for the best finish results, whether you’re speeding through an initial rough cut or a single-pass micro-finish. This complete lathe package includes the lathe, a sturdy bench and large tool storage backboards, so you can hang all your adapters within close reach.
One of the common problems that plague other brake lathes is the vibration and chatter transfer that directly affects the tool-tip and leaves an imperfect cut on the machined surface. The RL-8500 brake lathe by Ranger is specifically designed to address this issue by eliminating the need for gear-driven mechanical drives and variable-speed transmission devices.
Features
- Precision electric DC servo motors designed to meet the demanding requirements of industrial motion control
- Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones.
- Works on all cars or trucks, both foreign and domestic, with hub less drums, rotors (center hole sized 2-5/32” – 4”) and composite rotors (center hole sized 4” – 6-1/4”)
- Infinitely variable spindle and cross feed speed settings allow for rough and precision finish cuts
- Simple ergonomic controls are designed for minimal operator movement
- Massive tapered spindle bearings offer superior weight support during rotation
- An independent cross-feed motor eliminates the need for plastic or bronze shear gears
Specifications
Motor Drive Unit 115 – 230 VAC, 50 – 60 hz, 1
Ph, 20 amp
Max Rotor Thickness 2-1/2” (64 mm)
Max Rotor Diameter 17” (432 mm)
Brake Drum Diameter 6” – 28” (152 mm – 711 mm)
Max Load with Standard 1” Arbor 150 lbs. (68 kg)
Max Load with Optional 1-7/8”
Truck Arbor 250 lbs. (113 kg)
Spindle Travel 6-7/8” (175 mm)
Spindle Speed 150 rpm – 200 rpm
Shipping Weight w/ Bench/Tools 685 lbs. (311 kg)
Shipping Dimensions 62” x 49” x 36” (1,575 mm x
1,245 mm x 914 mm)
Estimated between and
Orders are processed within 1-3 business days. We strive to deliver all items within 7- 10 Business Days, depending on final destination. All items are delivered Via FedEx, UPS, USPS or a reputable and reliable local carrier
![]() |
Please allow 10 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it! |
|
![]() |
Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! |
![]() |
Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! |
|
![]() |
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. |
|
![]() |
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
![]() |
Ordering from Hot Shot Auto is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |
Simple, Durable, Trouble-Free Combination Brake Lathe
The revolutionary RL-8500 combination brake lathe uses independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically-driven lathes.
The ruggedly built RL-8500 brake lathe is capable of faster, easier and more accurate rotor/flywheel and drum/flywheel resurfacing than any other brake lathe in its class. Infinitely adjustable feed rates allow you to easily modify cut speeds with the simple turn of a dial. Now you can reduce or increase the cut-time for the best finish results, whether you’re speeding through an initial rough cut or a single-pass micro-finish. This complete lathe package includes the lathe, a sturdy bench and large tool storage backboards, so you can hang all your adapters within close reach.
One of the common problems that plague other brake lathes is the vibration and chatter transfer that directly affects the tool-tip and leaves an imperfect cut on the machined surface. The RL-8500 brake lathe by Ranger is specifically designed to address this issue by eliminating the need for gear-driven mechanical drives and variable-speed transmission devices.
Features
- Precision electric DC servo motors designed to meet the demanding requirements of industrial motion control
- Quick-Change Adapter-Plus system with built-in springs eliminates the need for conventional bell clamps and cones.
- Works on all cars or trucks, both foreign and domestic, with hub less drums, rotors (center hole sized 2-5/32” – 4”) and composite rotors (center hole sized 4” – 6-1/4”)
- Infinitely variable spindle and cross feed speed settings allow for rough and precision finish cuts
- Simple ergonomic controls are designed for minimal operator movement
- Massive tapered spindle bearings offer superior weight support during rotation
- An independent cross-feed motor eliminates the need for plastic or bronze shear gears
Specifications
Motor Drive Unit 115 – 230 VAC, 50 – 60 hz, 1
Ph, 20 amp
Max Rotor Thickness 2-1/2” (64 mm)
Max Rotor Diameter 17” (432 mm)
Brake Drum Diameter 6” – 28” (152 mm – 711 mm)
Max Load with Standard 1” Arbor 150 lbs. (68 kg)
Max Load with Optional 1-7/8”
Truck Arbor 250 lbs. (113 kg)
Spindle Travel 6-7/8” (175 mm)
Spindle Speed 150 rpm – 200 rpm
Shipping Weight w/ Bench/Tools 685 lbs. (311 kg)
Shipping Dimensions 62” x 49” x 36” (1,575 mm x
1,245 mm x 914 mm)
Estimated between and
Orders are processed within 1-3 business days. We strive to deliver all items within 7- 10 Business Days, depending on final destination. All items are delivered Via FedEx, UPS, USPS or a reputable and reliable local carrier
![]() |
Please allow 10 days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it! |
|
![]() |
Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! |
![]() |
Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! |
|
![]() |
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. |
|
![]() |
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. |
|
![]() |
Ordering from Hot Shot Auto is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. |