Includes:

(1) XPR-10AS BendPak XPR-10AS 10,000-lb. Capacity ALI Certified Lift (5175397)

XPR-10S Two-Post Lift Offers More Power, More Options

The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that’s ahead of its time and a 10,000-lb. lifting capacity. All height/width variations fit in shops with ceilings higher than 12’, and none of them will crowd your floor while you work beneath a vehicle. Every XPR-10S two-post lift features our telescoping screw pad assembly kit.

Why choose a symmetric car lift
Our XPR-10S symmetric two-post lift features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.

Direct-Drive two-post car lift technology
The XPR-10 two-post lift features low-pressure HVLP direct-drive cylinders, eliminating the need for lifting chains or screw mechanisms most commonly
found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and fewer maintenance costs
throughout the life of your lift. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is
preferred on commercial-grade two-post car lifts, as it has it has fewer moving parts than a chain-over roller cylinder configuration. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages.

Features
- Expandable top beam for wide or narrow drive-thru
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Telescoping arm design for more versatile arm
positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Large, 17” x 19” A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- Triple-telescoping arm design
- Versatile drop-in contact pads with stackable adapters
- ETL Approved

(1) R980AT Ranger Tire Changer / Swing Arm / Single-Tower Assist / 30" Capacity (5140147)

Power Assist Perfection + Tire Changer Protection

The R980AT tire changer, a popular alternative to the R980XR, is easy to operate, rugged and equipped with a power assist tower to help when mounting low-profile performance tires.

The Ranger NextGen™ series R980AT tire changer performs masterfully on a wide variety of wheels, including virtually all OEM configurations and performance tire and wheel configurations. Its power assist tower is an absolute must-have feature if you work with low-profile and high performance wheel configurations. The R980AT features the latest in design and wheel service technology, and it provides the best value and performance in its class.

Features
- Inflation Gauge With
Integrated Air Dump
Valve
- Inflation Pressure
Regulator/Limiter
- Brush
- Alloy-Steel Mount/
Demount Head
- Water Filter
- Tool Tray / Bin
Storage
- Breaker Bar
- Plastic-Polymer
Mount/Demount
Head
- Oiler / Lubricator
- Air Regulator
- Traveling Drop-Center
Hold Down Device
- Upper Bead Assist
Roller
- Large Soap /
Lubricator Bucket

Specifications

Motor 3 HP (220 VAC 50-60 HZ)
Drive System Type Electric / Air
Air Requirement 140-165 PSI (10-11 BAR)
Wheel Clamping Method 4 Clamps - Internal / External
Table Clamping System Dual Pneumatic Cylinders
Bead Breaking System Pneumatic Blade / Dual
Tower Design Rigid Fixed / Swing Arm
Power Assist Towers Single Assist Tower
Bead Lifting Roller(s) Single Lifting Roller
Bead Seating System Turbo Blast / Bead Seating
Internal Rim Clamping Capacity 10” – 30” (254 mm - 762 mm)
External Rim Clamping Capacity 9” – 28” (229 mm - 711 mm)
Turntable Tire Width Capacity
(Mounting) 4” – 18” (102 mm – 457 mm)
Bead Breaker Tire Width Capacity
(Demounting) 1.5” – 13” (38 mm – 330 mm)
Maximum Tire Diameter 50” (1,270 mm)
Shipping Weight 800 lbs. (363 kg)

(1)DST30P Wheel Balancer (5140154)

DST30P—One-Spin, Minimal Weight Placement

The DST30P wheel balancer accurately and efficiently calibrates wheel and tire configurations. Like the DST2420 wheel balancer, the DST30P handles wheels up to a 30” diameter. It also contains many of the same working components as the DST-2420 but with one exception: we took a 64-tooth magnetic transducer encoder and built it into this smaller unit for minimal yet incredibly precise wheel weight placements. The larger encoder features precision-cut square teeth to convert rotary position to a digital electronic signal, quickly achieving maximum profile and top-dead-center positioning

If you’re looking for more precise measuring than the DST-2420, the DST30P is the perfect wheel balancer for your shop. It’s a cost-effective hybrid unit that offers the most precise readings you’ll ever generate from a wheel balancer

Features
- Top positioning weight locator
- Inside & outside measuring
- Millimeter / inches selection
- Ounce / gram selection
- Manual wheel offset distance setting
- Self-calibration function
- Auto start when hood is lowered
- Wheel holding manual brake pedal
- Truck cone / spacer ring adapter set
- Wheel calipers
- Rear cone mount spring
- No-mar rear cone mount pressure cup
- Quick-release & mount hub nut

Specifications

Motor 1.5 HP, 110/220V, 50 / 60 Hz, 1Ph
Working Temperature -5°C / 27°F - 50°C / 82°F
Cycle Time 6 - 9 Seconds (avg.)
Balancing Modes Dynamic / Static / 3-Alloy
Drive System Belt Drive
Wheel Braking Automatic / Electronic
Cones Included 3 Standard / 1 Truck
Max. Tire Diameter 50” (1,270 mm)
Max. Tire Weight 150 lbs. (68 kg)
Wheel Diameter Capacity 8” - 30” (254 mm - 672 mm)
Wheel Width Capacity 1.2” - 20” (30 mm - 508 mm)
Balancing Increments 0.25 oz. (7 gram)
Balancing Speed 180 RPM
Accuracy +/- 1 gram (.035 oz.)
Resolution 0.01 ounce, 1.4°
Shipping Weight 398 lbs. (181 kg)

(1)APX-TS1 Accessory Pack:

(1) 5215761 Frame Cradle Pads

Frame Cradle Pads are Perfect for Trucks & SUVs

Anyone who has ever lifted a full-sized truck or SUV onto
a two-post lift knows what a dicey procedure it can be.
Especially if you are using the Lift Pad Assembly used for
most standard and compact vehicles. And it isn’t only the
safety of your car that you need to worry about. Reduce your
risk with the Frame Cradle Pads from BendPak, and make
sure your vehicle has nowhere to go except up and over—
when you decide.

With their rugged construction, Frame Cradle Pads are built
to last for as long as your shop is in business. The heavy-duty
steel, and thick polyurethane rubber pad lining are designed
to take on heavy abuse. Not to mention the polyurethane’s
textured surface, which protects your chassis frame from
damage, while providing an extra measure of safety by
reducing any chance of slipping. And with a 35 mm or 60 mm
diameter pin, your Frame Cradle Pads will drop into our two post lift arms with ease.

No matter what kind of work you’re doing, lifting your vehicle
safely should always be a priority. Trucks and SUVs have a
rectangular steel frame that simply isn’t compatible with a
normal Lift Pad Assembly. If you are lifting bigger trucks and
SUVs, then it is necessary to outfit your two-post lift with the
Frame Cradle Pad adapters. Your truck or SUV chassis frame
fits securely in the steel channel, preventing any potential
movement of your vehicle while it’s in the air. This provides
you with peace of mind while you do all the hard work
underneath.

Features
- Perfect for use with a BendPak two-post lift
- Accommodates 35 mm or 60 mm assemblies
- Sturdy steel construction
- Tactile rubber mat reduces slippage and protects finish
- Sold in sets of four

 (1) 5150555 Truck Cone Kit

Balance Truck Wheels in Seconds Flat

This truck cone and backing plate kit fits the majority of medium and heavy-duty truck wheels. Features superior centering and fitment coverage for OEM and aftermarket applications. Set consists of one large truck cone and one aluminum backing plate spacer. Double-sided centering cone fits hub sizes 4.75” – 6.75”. Fits Ranger wheel balancers with 36 mm shaft.

Features
- Double-sided centering cone fits hub sizes 4.75” – 6.75”
- Fits the majority of medium and heavy duty truck wheels
- Features superior centering and fitment coverage for OE
and aftermarket applications
- Fits Ranger Balancers with 36 mm shaft

 (1) 5150225 Tape Weights Combo

Quick-Peel™ Segmented Adhesive Steel Wheel Weights

Many states are banning the use of lead wheel weights. Ranger steel weights come in black and silver. Our Stick-On Steel Wheel Weights offer the best overall fit, as well as the most reliable and cost-effective choice. Ranger steel wheel weights are designed to have less impact on the environment and are corrosion resistant.

Our .25 oz. wheel weights are perfectly sized and weighted for most wheel balancing applications, and when paired with a Ranger wheel balancer, you’ll never use more weight than necessary for the job. Our adhesive is extra-sticky, lessening the chance of the weight falling off the wheel and improving your level of customer service. Customers will know the quality difference when you service their vehicle with Ranger wheel weights.

Features
- Black powder-coated surface helps eliminate corrosion
and staining of expensive wheels
- Strong adhesive backing for dependable attachment
- Quick-Peel™ liner for trouble-free use
- Lead-free, steel construction has less impact on the
environment
- Meets national environmental laws and health and safety
codes
- Designed to have same fit, function & look as OEM
weights
- Narrow profile contours easier to OEM wheel shapes
- Slender profile and out-of-sight mounting capability
enhance the looks of any wheel
- Low-profile design for increased clearance of close proximity calipers or brake components
- Self-dispensing carton features Free-Glide™ center hub
and nylon feeder for smooth, jam-free delivery
- Reduces inventory cost by eliminating traditional wheel
weight inventories and requiring less floor space

Specifications

Color Black
Count 700 pcs. / Roll
Weight .25 oz.
Width 1/2” (13 mm)
Roll Weight 11 lbs. (5 kg)