Includes:

4-Post Lift + Jacks + Airline Kit

Extended-Length Alignment Lift with 14,000-lb. Lift Capacity

The HDS-14LSXE alignment lift is designed for extended length vehicles, such as trucks and vans. The runways and overall length are extended by 30”. With runways now 229” in length, some very long vehicles can fit easily on this alignment lift. If your service bay demands these vehicle types, an extended length alignment lift from BendPak is absolutely necessary to perform long wheelbase alignments.

Slip plates
Multi-caster slip plates in the back and turn plates in the front allow for extremely precise, free-floating alignment.

Deluxe Turnplates
Aluminum-alloy construction turn plates are easily positioned using BendPak’s turn plate pockets. Larger and more robust than our previous slip-plate design, they’re also lighter in construction and feature dual “popsicle gap stops” for your convenience. Angled steel lock pins conveniently hold the plate in place when you want to use your machine strictly as a maintenance or storage lift.

Dual-hub cable sheaves
This BendPak alignment lift comes standard with robust 10.5” diameter cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles that are equally durable. Both contribute to the longevity and low-maintenance cost of owning and
operating your car lift.

Adjustable height locking positions
Get your alignment lift to just the right height. No need to reach or bend for the turn plates, as every few inches, each post column features a lock position for your convenience.

Features
- 14,000 pound lifting capacity
- CE Approved and Certified. Meets or exceeds the
standards prescribed by European Standard EN 1493
- Two runway lengths to choose
- Heavy-duty turn plates and integrated rear slip-plates
- Multi-position turn plate pockets
- Automatic leveling system
- Multiple auto-leveling locking positions
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal “Anti-Sway” slider blocks in each column
- Oversize sheaves and heavy-duty 1/2” aircraft cable
- Rugged 1-3/8” roller axles and oversize self-lubricating
cable sheaves
- Multi-position safety locks in each column with pushbutton safety release
- Runways adjust for different tread widths and feature a
durable matte finish
- Optional 7,000-lb. capacity bridge jacks available

Model HDS-14LSXE 
Style Alignment Lift 
SKU# 5175172 
Lifting Capacity 14,000 lbs. (6,350 kg)
A - Min. Runway Height 7-5/8" (192 mm)
B - Max. Rise 70" (1,778 mm)
C - Max. Lifting Height 77-5/8" (1,970 mm)
D - Overall Width 130" (3,301mm)
E - Outside Length 243" (6,170 mm)
F - Overall Length 271" (6,893 mm)
G - Height of Columns 93" (2,362 mm)
H - Width Between Columns 120" (3,046 mm)
I - Drive-Thru Clearance 98-3/8” (2,499 mm) 
J - Runway Width 20" (508 mm)
K - Length of Runways 229" (5,816 mm)
L - Width Between Runways 37.5" (952 mm) - 51" (1,295 mm) 
M - Min. 4-Wheel Alignment 89" (2,261 mm) 
N - Max. 4-Wheel Alignment 156" (3,962 mm) 
O - Max. 2-Wheel Alignment 212" (5,385 mm)
Min. Wheelbase @ Capacity 165" (4,191 mm) 
Min. Wheelbase @ 75% 140" (3,556 mm) 
Min. Wheelbase @ 50% 115" (2,921 mm) 
Min. Wheelbase @ 25% 95" (2,413 mm) 
Locking Positions 13
Lock Spacing every 4” (102 mm)

Lifting Time 60 seconds
Motor 220 VAC / 60 Hz. / 1 Ph 

Rolling Bridge Jack Made for an HDS-14 Four-Post Lift

This 7,000-lb. capacity rolling bridge jack is made for an HDS-14 series four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.

Features
- 7,000-lb. lifting capacity
- Easy-roll wheels
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit

Specifications

Lifting Capacity 7,000 lbs. (3,175 kg)
Suitable Lift Model(s) HDS-14 Series, HDSO14P
Pad Only: 4" (102 mm)
Pad + 2.75" Adapter: 6.75" (171 mm)
Pad + 5.5" Adapter: 9.5" (241 mm)
Min. Drive-Over Height*
Pad Only: 14.75" (375 mm)
Pad + 2.75" Adapter: 17.5" (445 mm)
Pad + 5.5" Adapter: 20.25" (514 mm)
Max. Lifting Height*
Support Base Width: 36.25" (921 mm) - 46.5" (1,181 mm)
Max. Arm Reach: 56" (1,422 mm)
Min. Arm Reach: 42" (1,067 mm)
Reach
Shipping Weight: 431 lbs. (195 kg)
Shipping Dimensions: 41.25" x 25" x 15" (1,048 mm x 635 mm x
381 mm)

Provide Air to Two Bridge Jacks at Once

Rolling bridge jacks are great for extending the functionality of your BendPak four-post lift, and they’re about to get a whole lot better. Install this helpful kit and elegantly hide the airlines beneath your lift’s own runways. One AK-14 kit provides air infrastructure for two jacks.

Features
- Allows bridge jack pneumatic airlines to be gracefully
hidden beneath lift runways
- High-quality mounts
- Airline included
- Note: Hose length varies depending on lift model. Order
the appropriate Air Line Kit according to your lift model.