BL-7000TLX portable car lift system

The 7,000-lb. capacity BL-7000TLX is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the BL-7000TLX, only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66" lift point reach on the BL-7000-TLX allows operator access to more trucks and SUVs than ever before.

Despite the longer, beefier construction, the BL-7000TLX car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.

Like our lower-capacity portable car lifts (the BL-3500TL, BL-5000TL and BL-7000TL), built-in durable urethane wheels mean the BL-7000EXT frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary.

The 76.5" frames are longer than our TL models (the same length as the BL-5000TLX), but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.

With a collapsed profile just over 3.5", the BL-7000TLX needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.

Extended-length car lift design

The BL-7000TLX portable car lift has been redesigned to accommodate heavy, high-clearance vehicles with long wheelbases. We’ve increased the overall frame length and lift point spread by 6”. This means the minimum lift point spread is now 6” longer, so smaller vehicles may not fit with the BL-7000TLX.

TL minimum lift point spread: 31.5"
TLX minimum lift point spread: 37.5"

TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"

TL overall frame length: 70"
TLX overall frame length: 76.5" (7000TLX model only)

There are dozens of ways to stow your QuickJack in a garage: lean them against the wall; stack them on top of each other; tuck them together under your vehicle, etc. The opportunities for easy storage are practically endless. Some people prefer to hang their frames on the wall, up and out of the way. These convenient wall hangers are the best way to make that happen.

If you'd like to hang your portable car lift frames on the wall of your garage, our exclusive hangers mount directly into a sturdy wall stud for safe, simple storage. We recommend installing these wall hangers at the same height and high enough so that the frames rest on the floor. This makes it much easier to lift and hang the frames onto the hooks of the wall hangers.

Each mount features a sleek, laser-cut QuickJack logo to provide visible proof that this is the OFFICIAL QuickJack wall mount set. These wall hangers were designed and engineered by the same minds that designed your QuickJack portable car lift, so you know rigorous testing standards were applied and unparalleled safety factors were built in. Real-world testing and advanced computer analysis were performed to ensure quality and long-term resilience.

Now in a matte black powder-coat finish

We made our wall hangers just as sleek as your QuickJack. They now ship with a very durable (yes, we tested) black powder coat finish that matches your QuickJack frames for an even better look in your garage!

We know you'll be impressed by how durable your hangers are. Plus, they look great in any garage environment. If you've been looking for a way to vertically suspend your QuickJack frames, these hangers offer the perfect solution.